Roland Music ATELIER AT500 Owner's Manual page 188

Editing Your Musical Performance Data
4.
Touch <Quantize>.
fig.08-17-2.eps
The Quantize screen appears.
fig.08-17.eps
5.
Touch the "Track" value (the track that will be
quantized).
6.
Touch < > <
track that will be quantized).
fig.08-18.eps
ALL, RHYTHM, ACCOMP, BASS, LOWER, UPPER, SOLO
If you select "ALL," the recording in all the tracks will be
quantized.
7.
When you're done making the settings, touch
<Exit>.
8.
Touch the "From" value (the measure at which
quantization will begin).
9.
Touch < > <
at which quantization will begin).
186
> to specify the "Track" (the
Track
> to set "From" (the measure
10.
When you're done making the settings, touch
<Exit>.
11.
Touch the "For" value (the number of
measures that will be quantized).
12.
Touch < > <
measures that will be quantized).
To specify everything through to the last measure, set
"for: ALL."
13.
When you're done making the settings, touch
<Exit>.
14.
Touch the "Resolution" value (the resolution at
which notes will be aligned).
15.
Touch the screen to set "Resolution" (the
resolution at which notes will be aligned).
The "Resolution" (the timing to which notes are aligned)
can be set to one of the following settings.
fig.08-20.eps
Half note Quarter note
8th note 8th note triplet
16 note triplet 32th note
16.
When you're done making the settings, touch
<Exit>.
17.
Touch <Execute>.
The following display appears.
fig.08-25.eps
To cancel operation, touch <Cancel>.
18.
Touch <OK> to have the quantization carried
out.
When the quantizing is finished, you are returned to the
Quantize screen.
> to set "For" (the number of
Quarter note triplet
16th note