Roland Music ATELIER AT500 Owner's Manual page 87

1.
Select a Rhythm (p. 71).
2.
Press the [One Touch Program] button.
The [One Touch Program] button's indicator will light.
fig.02-15.eps
An One Touch Program Group (One Touch Program Group select) screen like
the one shown below will be displayed.
fig.02-16.epsf
3.
While the One Touch Program Group screen is displayed,
touch the screen to select a One Touch Program group.
If you fail to select a One Touch Program group while the One Touch Program
Group screen is displayed, "Basic" will be selected automatically.
Panel settings appropriate for the Rhythm and Automatic Accompaniment will
automatically be called up for Registration [1]–[4] buttons.
4.
Press the Registration [1]–[4] button to select panel settings.
5.
On the Lower keyboard, play a chord.
At the moment you play the lower keyboard, the Intro will begin, and then the
Rhythm and Automatic Accompaniment will play.
6.
Press the [Intro/Ending] or [Start/Stop] button to stop the
Rhythm.
Rhythm and Automatic Accompaniment stops.
7.
Press the [One Touch Program] button, extinguishing its
indicator.
You will return to the panel settings that were in effect prior to pressing the
[One Touch Program] button.
Using Rhythm Performance
When you press the [One
Touch Program] button, the
"Arranger Update" setting will
automatically change to
"INSTANT" (p. 99).
To redisplay the One Touch
Program Group screen, while
holding down the Registration
[Write] button, press the [One
Touch Program] button.
Touch the One Touch Program
Group screen to reselect the
group.
The One Touch Program
function will be turned off if
you're using the Quick
Registration function (p. 35) or
if you've loaded a Registration.
(p. 106)
85