Using the Effects (FX)
The onboard effects processor, "FX" , has 30 different effects to choose from.
FX Settings (FX)
Switching the FX Type (FX-TYPE)
Here's how to switch the FX type.
1. Choose MENU
FX
Ú
Ú
The FX-TYPE screen appears.
A diagram of the
selected FX type is
shown.
2. Turn [Knob 3] (–/+) to select an FX type .
3. Press [Button 3] (OK) to confirm .
Parameter
Value
FX Type
00(THRU)–30
Editing FX Parameters (FX-EDIT)
Here's how to edit the parameters of each FX.
1. Choose MENU
FX
Ú
Ú
The FX-EDIT screen appears.
FX type
[Knob 1] (SEL) selects
a parameter.
2. Turn [Knob 1] (SEL) to select a parameter .
3. Turn [Knob 3] (–/+) to edit the value .
• The parameters will differ depending on the FX.
• Parameters for which the following icons are shown can be controlled using the knobs in the FX CONTROL screen (p. 41).
Knob 1
Knob 2
Knob 3
TYPE (p . 16) .
Explanation
FX type. If you select "00(THRU), " FX will not be applied.
EDIT (p . 16) .
Pads for which FX is enabled
FX type
[Knob 3] (TYPE) displays a list of FX types.
[Button 3] (BYPASS) temporarily turns FX off.
Pads for which FX is enabled
[Knob 3] (–/+) edits the value.
[Button 3] (BYPASS) temporarily turns FX off.
39