Respironics Alice PDx Service & Technical Reference Manual page 53

5. Verify that Respironics Sleepware
lowing software installation instructions:
a. You must be logged onto the host computer and have administrative rights (e.g., you can
install and remove software, grant permissions to files and folders to other users, etc.)
b. Ensure that all folders to be used by specific groups and users have the necessary permis-
sions settings.
c. The permissions on all data locations must be opened so that all users have read and write
access. The software installer will attempt to do this for the chosen installation folder.
d. Insert the Sleepware CD into the CD drive of your computer and follow the on-screen instruc-
tions.
e. After installation is complete, create all of the data locations needed (see Sleepware's online
help for details).
f. As Administrator, change the security rights attached to any other data locations you've cre-
ated to allow all users full control of these directories. You can also change the user type back
to "restricted" on the computer if necessary. Refer to Windows Help and Support for informa-
tion on security rights. (Indicate "Completed" on the data sheet.)
6. Connect the Communications cable between the Alice PDx communications connector and the
USB port of host computer.
7. Open the Sleepware software and perform Add Device to Sleepware.You must add a new Alice
PDx device to Sleepware before it can be used:
a. Click on the Configure button on the Sleepware starter bar and select the Add/Modify Device
option from the pop-up menu.
b. The Add/Modify Device window is displayed.
P 48
AGE
®
is installed on the host computer, if not, proceed with the fol-
TM
®
Alice PDx Service & Technical Reference Manual
1054417, V . 01
ER