Older And / Or - Respironics Alice PDx Service & Technical Reference Manual

R D
EPLACING THE ISPLAY
To remove the Display Holder (w/Display):
1. Remove the Display Enclosure. Refer to page 36 if necessary.
2. Remove the Main PCA Stack. Refer to page 39 for removal instructions if necessary.
3. Lift the Display Holder out of the Display Enclosure Cover.
4. Remove the Display from the Display Holder. The Display is equipped with a non-removable Rib-
bon Cable.
Place this end in first
To install the Display Holder with Display (LCD):
1. Install the foam on the Display Holder as shown in Figure L.
2. Install the Display in the DIsplay Holder as shown above in Figure K.
3. Assemble the remainder of the Alice PDx as necessary.
P 42
AGE
H / D
OLDER AND OR ISPLAY
Display (LCD)
F K: LCD
IGURE AND
TM
®
Alice PDx Service & Technical Reference Manual
(LCD)
Verify that Display and
Display Holder snap
together
D H
ISPLAY OLDER
Display Holder
1054417, V
ER
. 01