Respironics Alice PDx Service & Technical Reference Manual page 38

R B
EPLACING THE ATTERY
To replace the Battery Enclosure:
1. Using a Torx T8 screwdriver, remove and retain the four screws that secure the Battery Enclosure
to the Clamshell Assembly.
2. Lift the Battery Enclosure away from the Battery PCA/Battery Enclosure Cover Assembly. Refer to
the following illustration.
Battery Enclosure
The Flex Cable is
Delicate. Handle
with caution.
To install the Battery Enclosure:
1. Be sure the Battery PCA is properly seated in the Battery Enclosure Cover.
2. Align the Battery Enclosure with the Battery PCA/Battery Enclosure Cover Assembly and properly
seat the Battery Closure in place.
3. Secure the Battery Enclosure with the four screws previously removed.
1054417, V . 01
ER
E
NCLOSURE
2.5 in.-lbs. (x4)
Battery PCA
F C: B
IGURE ATTERY
TM
®
Alice PDx Service & Technical Reference Manual
E R
NCLOSURE EMOVAL
Battery Enclosure Cover is
included in the Clamshell
Assembly.
P
AGE
33