Before You Start; Electrical Rating; Assembly & Adjustment; Assembly Instruction - STRING WORKS EE Series User Manual

8
1.3

Before you start

Check for and remove obstacles in path of the table top. If divergence between the
columns will be discovered, please do a manual reset as listed in section 3.2.
1.4

Electrical rating

Electrical rating, input: 110-240VAC, 50-60Hz, 3,2A. Output 29V or 35V.
2. ASSEMBLY & ADJUSTMENT
2.1

Assembly Instruction

The official assembly instruction will be found with the base components. Make sure to
ask your desk vendor for an approved combination of desktop and frame.
2.2

Setup procedure

CAUTION
Risk of electrical shock:
The power cord must be unplugged while
the control unit is being commissioned.
This table is equipped with ROL ECS+
system, to setup the controlling device
proceed as follows.
1. Connect the motor cables to the
control unit 8-pin motor cables (2) When 2 motors, connect to socket 1 and 2.
2. Connect the handset to the relevant socket at the control unit / ECS+
3. Connect the Power Supply to the control unit / ECS+
4. Connect the power supply to the main.
At first use, the control unit must register the lowest point of elevation. To reset, press
"down" icon and go to lowest level.
String Furniture AB www.string.se info@string.se