STRING WORKS EE Series User Manual page 13

NOTICE
The desktop will continue moving downwards until you release the button or the mini-
mum height is reached.
3.1.3 Simple memory, end positions
ECS+ have editable memory for high and low (sit or stand) position. Could also be used
to avoid collision with i.e. a cabinet/pedestal.
How to set memory: Drive your table to the level you will store. Press both buttons
3 times (0,5-1 second between each pressing).
Then press +/- to set position (0,5-1 second). Do the same procedure for your second
store. The table will do a gentle rise to confirmation the setting.
+
½ - 1 sec
To erase the setting, please follow manual reset as section 3.2.
To drive the table outside the memory setting: Press "up" or "down" button during min
5 seconds, the table could be adjusted.
Above
"Upper level"
>5 sec
String Furniture AB
+
½ - 1 sec
Lower than
"Lower level"
>5 sec
www.string.se info@string.se
Set "Upper level"
Set "Lower level"
13