STRING WORKS EE Series User Manual page 6

6
12. Do not use the desk with if it has been dropped or damaged. Contact the manu-
facturer for examination or repair.
13. It is not allowed to connect self-constructed products to the power supply, control
unit/ECS+, handset or other electrical device. To prevent damage, use only compo-
nents recommended by the manufacturing company.
WARNING
Risk of injury, or death:
1. During the raising or lowering of the table there exists a risk of squeezing or pin-
ching between the moving desktop and fixed objects.
2. The necessary safety margins depend on the greatest type of injury risk that can
be predicted. Where possible small pinch points exist (i.e. fingers) use at least a 2,5
cm (1 inch) safety margin and for body or head (especially where children may be
present) use a minimum of 40 cm (16 inch) count from the floor or from their top of
the table feet if that is relevant
3. During the lowering or rising of the desktop, the operator must ensure that no
person or object risk being harmed by the operation.
4. This tag (at right) should be located on the table
during the initial installation.
5. Keep children away from moving parts and
underneath the table.
6. The intended use of the table is adjusting a work
surface between sitting and a standing position.
The table is not designed for other uses.
7. The table must only be operated while in an
upright position and must under no circum-
stances be operated while upside down.
8. The table must not be overloaded. The maximum
allowable load is shown on the power supply
label.
9. The table must be operated in a dry, enclosed
space, such as an office or similar, Do not operate
outdoors.
10. As option the table can be equipped with Anti Collision (AC) function. In the event
of a faulty the desktop may move slightly before the safety feature is engaged. Stay
clear of pinch points when the desktop is moving.
String Furniture AB www.string.se info@string.se