Table of Contents
Advertisement
Problem
My image is
blurry.
My image is
too bright.
Chapter 7: Troubleshooting and support
Possible cause
The camera
was set to
Normal
focus
when it should
have been set
to
Macro
focus, or vice
versa.
You moved the
camera while
you took the
picture.
The light is low
and the flash
is set to
Flash
Off
.
The camera
focused on the
wrong thing, or
was unable to
focus.
The flash
provided too
much light.
You were too
close to the
subject to use
the flash.
Solution
Set the camera to
or to
Normal
focus, and try
taking the picture again. (See
Setting the focus range
page 30.)
Hold the camera steady as you
press the
Shutter
a tripod.
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or set
the flash to
Flash On
page 33).
Use
Focus
Lock. (See
lock
on page 27.)
Use the
Flash Off
page 33).
Move back from the subject or use
the
Flash Off
page 33), and take the picture
again.
Macro
focus
on
button or use
(see
Using focus
setting (see
setting (see
81
Advertisement
Table of Contents
