Lacp Mad Detection-Enabled Irf Configuration Example (With Four Member Switches) - HP A7503 Configuration Manual

Start to check configuration with next startup configuration file, please wait.
.........DONE!
This command will reboot the device. Continue? [Y/N]:y
#May 6 15:31:09:724 2010 HP DEVM/1/REBOOT:
Reboot device by command.
%May 6 15:31:09:734 2010 HP DEVM/5/SYSTEM_REBOOT: System is rebooting now.
# After device reboot, Device B re-joins the IRF fabric. You can use the display irf command to view the
topology information about the IRF fabric.
<Sysname> display irf topology
-------------------------------------------------------------------------
Switch
2
1
LACP MAD detection-enabled IRF configuration example (with
four member switches)
Network requirements
The number of PCs on the enterprise network (see
on the access switches. To address business growth, increase the number of ports at the access layer
while protecting the present investments of the customer and ensuring ease of management and
maintenance.
Figure 16 Network diagram
GE1/4/0/2
Device A
XGE1/3/0/2
(IRF-port1/1)
XGE3/2/0/2
(IRF-port3/2)
Device C
Topology Info
IRF-Port1
Link neighbor
DOWN --
UP 2
Device E
GE4/0/1
GE4/0/4
GE4/0/2
GE4/0/3
IRF
XGE1/3/0/1 XGE2/3/0/2
(IRF-port1/2) (IRF-port2/1)
GE4/3/0/1
GE3/3/0/1
XGE3/2/0/1 XGE4/2/0/2
(IRF-port3/1) (IRF-port4/2)
IRF-Port2
Link neighbor
UP 1
DIS --
Figure 16) is outgrowing the number of ports available
IP network
GE2/4/0/1
Device B
XGE2/3/0/1
(IRF-port2/2)
XGE4/2/0/1
(IRF-port4/1)
Device D
42
Belong To
00e0-fc0f-8c02
00e0-fc0f-8c02