Japanese Notice; Korean Notice; Power Cord Set Requirements; Japanese Power Cord Requirements - HP U160 User Manual

Japanese Notice

Korean Notice

Power Cord Set Requirements

The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100–120V or 200–240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for
use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is
approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage
and current rating marked on the product. In addition, the cross-sectional area of the wire must be a
minimum of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12
feet (3.6 m). If you have questions about the type of power cord to use, contact an authorized HP
service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product.

Japanese Power Cord Requirements

For use in Japan, use only the power cord received with this product.
CAUTION:

Product Environmental Notices

ENERGY STAR® Qualification
As an ENERGY STAR® Partner, Hewlett Packard Company has followed the EPA's enhanced
product qualification and certification process to ensure that the products marked with the ENERGY
STAR® logo are ENERGY STAR® qualified per the applicable ENERGY STAR® guidelines for
energy efficiency.
Do not use the power cord received with this product on any other products.
Japanese Notice 13