German Ergonomics Notice; Japanese Notice; Korean Notice; Power Cord Set Require Power Cord Set Requirements - HP LP2275w User Manual

Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany

German Ergonomics Notice

German Ergonomics Notice
HP products which bear the "GS" approval mark, when forming part of a system comprising HP brand HP products which bear the "GS" approval mark, when forming part of a system comprising HP brand
computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable ergonomic computers, keyboards and monitors that bear the "GS" approval mark, meet the applicable ergonomic
requirements. The installation guides included with the products provide configuration information. requirements. The installation guides included with the products provide configuration information.

Japanese Notice

Japanese Notice

Korean Notice

Korean Notice
Power Cord Set Requirements Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the
monitor to operate on input voltages between 100–120V or 200–240V. monitor to operate on input voltages between 100–120V or 200–240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use
in the country where you purchased the equipment. in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a power cord that is If you need to obtain a power cord for a different country, you should purchase a power cord that is
approved for use in that country. approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked on the product's The power cord must be rated for the product and for the voltage and current marked on the product's
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and
current rating marked on the product. In addition, the cross-sectional area of the wire must be current rating marked on the product. In addition, the cross-sect
of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).
If you have questions about the type of power cord to use, contact an authorized HP service provider. If you have questions about the type of power cord to use, contact an authorized HP service provider.
A power cord A power cord should be
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the
cord exits from the product. cord exits from the product.
Japanese Power Cord Requirements Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product. For use in Japan, use only the power cord received with this product.
46 46 Appen Ap pendi dix x C C Age
should be routed so tha routed so that it is not likely to be wa
Agency ncy Reg Regula ulator tory y Not Notice ices s
ional area of the wire must be a minimum
t it is not likely to be walked on or pi lked on or pinched by item
a minimum
nched by items placed upo s placed upon n