English
2 Rotate and lift the connector cover to disengage it
from the radio.
3 To attach the accessory connector cover, insert the
hooked end
of the cover into the slot above the
connector.
4 Press downward on the cover's top to seat it in the
slot.
28
A
Attaching the Belt Clip
B
C
5 Once in place, tighten by rotating the thumbscrew
clockwise by hand.
1 Align the grooves of the belt clip with those of the
radio and push down until you hear a click.
2 To remove the clip, use a flatbladed object to press
the belt clip tab
away from the radio. Then, slide
the clip upward and away from the radio.
Send Feedback