Chapter 10: General Radio Operation; Selecting A Zone; Selecting A Radio Channel - Motorola APX 4000Li User Manual

General Radio Operation
This chapter explains the general radio operations in your
radio.

Selecting a Zone

Your radio must be preprogrammed for you to use this
feature.
A zone is a group of channels. Do one of the following to
select a radio channel. You can use these options
interchangeably depending on your preference and the
programmed functions.
• Turn the preprogrammed Zone Change MFK to the
required zone.
If Mode Change is secondary feature of the MFK,
press the MFK once to toggle to Zone Change MFK
then only select the required zone.
• Select a zone using the radio menu ZnUp or ZnDn:
a. Press and hold the Menu Select button directly
below ZnUp or ZnDn until the required zone
appears.
Send Feedback
Positions of ZnUp and ZnDn on the display may
differ each time you release the Menu Select
button. Read carefully before you press.
b. Press the PTT button to transmit on the displayed
zone channel.

Selecting a Radio Channel

A channel is a group of radio characteristics, such as
transmit/receive frequency pairs. Do one of the following to
select a radio channel. You can use the options
interchangeably depending on your preference and the
programmed functions.
• Select a channel using the MFK:
a. If channel is set as the primary mode, turn the
MFK until the display shows the desired channel.
If channel is not set as the primary mode, press
the MFK once and repeat this step.
b. Press the PTT button to begin transmitting on the
displayed channel.
• Select a channel using the radio menu Channel Up
or Channel Down:
English
47