Smart Ptt Feature (Conventional Only); Viewing The Ip Address - Motorola APX 4000Li User Manual

English

Smart PTT Feature (Conventional Only)

Smart PTT is a per-personality, programmable feature used
in conventional radio systems to keep radio users from
talking over other radio conversations.
When smart PTT is enabled in your radio, you cannot
transmit on an active channel.
If you try to transmit on an active smart-PTT channel, you
hear an alert tone, and the transmission is inhibited. The
LED lights up solid yellow to indicate that the channel is
busy.
The following table shows the variations of smart PTT:
Mode Description
Transmit Inhibit You cannot transmit if any traffic is
on Busy Chan- detected on the channel.
nel with Carrier
Transmit Inhibit You cannot transmit on an active
on Busy Chan- channel with a squelch code or (if
nel with Wrong secure-equipped) encryption key
Squelch Code other than your own. If the PL code
is the same as yours, the transmis-
sion is not prevented.
80
Mode
Quick-Key Over-
ride

Viewing the IP Address

This feature displays the IP address.
1 Perform one of the following actions:
•
•
The display shows the IP Address screen.
2 Press Exit to return to the Home screen.
Table continued...
Description
Your radio must be preprogram-
med to allow you to use Quick-Key
Override. This feature can work in
conjunction with either of the two
above variations. You can override
the transmit-inhibit state by quick-
keying the radio. In other words,
two PTT button presses within the
preprogrammed time limit.
Press the preprogrammed IP button.
Press the Menu Select button directly below IP.
Send Feedback