Out-Of-Range Radio; Site Trunking Feature; Locking And Unlocking A Site - Motorola APX 4000Li User Manual

Apx two-way radios model 1
Hide thumbs Also See for APX 4000Li:
Table of Contents

Advertisement

To continue in Failsoft and to communicate with other
talkgroups, refer to the following procedure.
1 Rotate the Mode Knob to change to a different
repeater frequency.
2 Press the PTT button to talk, and release the button
to listen.

Out-of-Range Radio

When your radio goes out of the range of the system, it can
no longer lock onto a control channel.
You hear a low-pitched tone and/or the display shows the
currently selected zone/channel combination and Out of
range. Your radio remains in this out-of-range condition
until it locks onto a control channel, it locks onto a failsoft
channel, or it is turned off.

Site Trunking Feature

If the zone controller loses communication with any site,
that site reverts to site trunking.
The display shows the currently selected zone/channel
combination and Site trunking.
Send Feedback
NOTICE:
When this occurs, you can communicate only with
other radios within your trunking site.

Locking and Unlocking a Site

This feature allows your radio to lock onto a specific site
and not roam among wide-area talkgroup sites. This
feature should be used with caution, since it inhibits
roaming to another site in a wide-area system.
You can toggle the lock state between locked and unlocked
by pressing the preprogrammed Site Lock/Unlock button.
Follow the procedure to lock and unlock a site using the
radio menu.
1 Press the Menu Select button directly below Site.
2 Perform one of the following actions:
To lock the site, press the Menu Select button
directly below Lock. The display shows Site
locked.
English
71

Advertisement

Table of Contents
loading

Table of Contents