Aalborg Command Module Operating Manual page 44

No Type Description
9 Single Data
Request Returns
a string
containing readings
in %F.S. for all
available channels.
10 Turns ON/OFF the
16 bit check sum
transmission of
check sums with
the data packet.
MODE: 0 - OFF
1 - ON
11 Set TOTALIZER
start FLOW in
%F.S.
12 Set TOTALIZER
stop VOLUME in
current volume
based E.U.
13 Set TOTALIZER
MODE
14 Reset TOTALIZER
to ZERO
15 Read TOTALIZER
VOLUME
Returns volume in
current E.U.
16 TOTALIZER Status
command Returns
current settings for
all available
channels (mode,
action, start flow)
17 Second TOTALIZER
Status command.
Returns current
STOP VOLUME
settings for all
available channels.
18 Set ALARM MODE AM
19 Set ALARM LOW
flow margin
in %F.S.
Command Argument 1 Argument 2 Argument 3 Argument 4
SD NON
CS MODE char
[0 - 1] *0
TS CHANNEL
1 char. [1-4]
TP CHANNEL
1 char. [1-4]
TM CHANNEL
1 char.
[1-4]
TZ CHANNEL
1 char.
[1-4]
TR CHANNEL
1 char.
[1-4]
SCT NON
STS NON
CHANNEL
1 char. [1-4]
AL CHANNEL
1 char.
[1-4]
VALUE
float
[0-105.0]
VOLUME
[0-999999.8]
MODE [0-1] ACTION
0- DISABLE [0-2]
1- ENABLE 0 - NON
1- BUZER
2 - VALVE
CLOSE
MODE [0-1] ACTION
0- DISABLE [0-2]
1- ENABLE 0 - NON
1- BUZER
2 - VALVE
CLOSE
VALUE
float
[0-105.0]
38
Return string
String with current
reading in %F.S
for all channels.
If channel not
calibrated [*]
will be added
to the reading.
CS MODE
OK[CR][LF]
Ex: CS 0
OK[CR][LF]
TS CH VALUE
OK[CR][LF]
Ex: TS 2 5.0
OK[CR][LF]
TP CH VOLUME
OK[CR][LF]
Ex: TP 2 1000
OK[CR][LF]
TM CH MODE
ACTION OK[CR]
[LF]Ex: TM 1 1 2
OK[CR][LF]
TZ CH OK[CR]
[LF]Ex: TZ 2
OK[CR][LF]
TOT#CH: VOL
EU[CR][LF]
TOT#2: 1005.5
L[CR][LF]
SCT M M A A SF
SF[CR][LF]
Ex: SCT 1 1 2 2
2.5 5.0[CR][LF]
(for two channels
SDPROC)
STS VOL
VOL[CR][LF]
Ex: STS 1000.0
15000.0[CR][LF]
(for two channels
SDPROC)
DELAY [0 - 65535] AM
In seconds CH MODE
ACTION OK[CR]
[LF]Ex: AM 1 1
2 0 OK[CR][LF]
AL CH VALUE
OK[CR][LF] Ex: AL
2 5.0 OK[CR][LF]