Status Check; Multi Channel Sdproc; Start Up Display; E.2.10 Status Check - Aalborg Command Module Operating Manual

e.2.10 Status Check

While in the Main Display press the UP button on the front panel of the SDPROC. The
Relays Assignment Status will appear.
Pressing the UP button again will bring up the Totalizer Settings screen. Pressing the
DOWN button will return to the Main Display.
Press UP one more time to return to the Main Display.
E.3 MULTI CHANNEL SDPROC
e.3.1 Start up Display
Switching the power ON, the following will be shown on the display at the front of the
SDPROC.
Relays Status Display One channel SDPROC
Totalizer Settings Display One channel SDPROC
Start up Display for 2 channel SDPROC
Start up Display for 3 channel SDPROC
Start up Display for 4 channel SDPROC
17