Specifications; Ec Declaration Of Conformity - Makita HM1214C Instruction Manual

SPECIFICATIONS

Model
Blows per minute
Overall length
Net weight
Safety class
without notice.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for chiselling work in concrete,
brick, stone and asphalt as well as for driving and com-
pacting with appropriate accessories.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
Sound pressure level (L
Sound power level (L
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
Vibration emission (a
pA
2
h,CHeq
2
NOTE: The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Demolition Hammer
are of series production and
Conforms to the following European Directives:
And are manufactured in accordance with the following
EN60745
The technical documentation is kept by our authorised
Makita International Europe Ltd.
Michigan Drive, Tongwell,
The conformity assessment procedure required by
VIII.
Tillystraße 2
D-90431 Nürnberg
2 ENGLISH
HM1214C
-1
950 - 1,900 min
700 mm
12.3 kg
II