Operation; Maintenance - Makita HM1214C Instruction Manual

Hide thumbs Also See for HM1214C:

Table of Contents

After installing, always make sure that the bit is securely

held in place by trying to pull it out.

To remove the bit, pull the releasing cover down all the

way and pull the bit out.

1. Releasing cover

Bit angle

1. Change ring cover

The bit can be secured at 12 different angles. To

change the bit angle, slide the change ring cover for-

ward, then turn the change ring cover to change the bit

angle. At the desired angle, slide the change ring cover

back to the original position. The bit will be secured in

place.

OPERATION

Chipping/Scaling/Demolition

hold the tool by both side grip and switch handle during

operations. Turn the tool on and apply slight pressure

on the tool so that the tool will not bounce around,

Lubrication

This tool requires no hourly or daily lubrication because

it has a grease-packed lubrication system. It should be

relubricated regularly. Send the complete tool to Makita

service.

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

6 ENGLISH

CAUTION:

unplugged before attempting to perform inspec-

tion or maintenance.

or the like. Discoloration, deformation or cracks

may result.

CAUTION:

Authorized Service Centers only.

Table of Contents