Electrolux TE1120 User Manual page 19

1)
Problem
Incorrect programme selection.
The filter is clogged.
Too high volume of the load.
The airflow grill is clogged.
Unsatisfactory
drying result.
Dirt on the humidity sensor in the
drum.
Incorrect remaining laundry mois-
ture degree.
The condenser is clogged.
The filter not locked in the posi-
The loading
tion.
door does not
The laundry is locked between
closed
the door and the seal.
You try to change the programme
or the option after the start of the
cycle.
Err (Error) on
the display.
The option you try to activate is
not applicable with the selected
programme.
Defective drum lamp.
No drum light
Abnormally The time to end is calculated on
elapsing time the basis of the volume and
on the display. dampness of the laundry.
The water container is full.
Programme in-
active.
Too small laundry volume.
Drying cycle too
short.
The laundry is too dry.
Possible cause Remedy
Do the selection of the applicable
2)
programme.
3)
Clean the filter.
Obey the maximum load volume.
Clean the airflow grill in the bot-
tom of the appliance.
Clean the front surface of the
drum.
Adjust remaining laundry moisture
4)
degree.
Clean the condenser.
Put the filter in the correct posi-
tion.
Put the load correctly in the drum.
Turn the tumble dryer off and on.
Make the new selection.
Turn the tumble dryer off and on.
Make the new selection.
Contact the service centre to re-
place the drum lamp.
The automatic procedure — this
is not the appliance malfunction.
Drain the water container, push
the Start/Pause button.
Do the selection of time pro-
gramme. The time value must be
related to the load. To dry 1 item
or small quantities of the laundry
we recommend to use short
times.
Do the selection of the time pro-
gramme with longer time.
ENGLISH 19
3)
3)