Advertisement
DISASSEMBLY- AND RE-ASSEMBLY ADVISE
- Unplug the appliance from the mains!
- Unscrew the two Phillips screws.
- Remove the switch knob by using a screw driver.
- Unscrew the blender coupling (left-handed thread!) by
holding the motor axle with a slotted screwdriver.
- Disconnect the two motorwires from the soldered point on
the switch and from the crimped connection to the mains
cord.
- To reassemble the appliance, do the steps backwards.
HR1720/AC
HR1721/AC
HR1724/AC
HR1727/AC
3-3
Advertisement
