FeiYu Tech WG MINI User Manual

Introduction
1
FY WG Mini is a lightweight, yet feature-rich, wearable 2 axis gimbal capable of capturing immersive and fully stabilized footages. It is compatible with GoPro
HERO4/ 3+/ 3 (with optional mounting space for GoPro LCD BacPac) and other cameras with similar dimensions.
The FY WG Mini is a miniaturized version of the best-selling FeiYu gimbal, offering exceptional stabilization technology in a wearable
form factor for action cameras. A GoPro T-Clamp adapter is packaged with every FY WG Mini. Users can attach the gimbal to any accessories supporting the
GoPro three-prong mount. The FY WG Mini also contains two 1/4"-20 tripod mounts on its gimbal body, allowing the gimbal to be mounted in different
orientations to all universal tripod screw mount accessories (including helmets, bikes,
selfie sticks and other accessories).
Install
2
Operation
3
Function Function
Switch between different operating modes by pressing the function button.
Button
Button
The LED light will flash distinctively to indicate different operating modes.
Operating Modes and Functions Operating Modes and Functions
- Tilting Mode
Mode #1 Camera is permitted to tilting up or down. Panning is restricted.
- Lock Mode
Camera stays in its current orientation. All panning are restricted.
Mode #2
Manual Pulling Locking
After the gimbal has been powered on for eight seconds, the tilt angle
can be adjusted manually in the Lock Mode. Adjust the titl angle to the desired position and wait for
0.5 second until the gimbal registers the new angle.
Operation LED Status
Single Tap LED Flashes Once
Long Press
On Constantly
For 1 Second
Accessories
4
Rechargeable
Charger
Battery
Input: DC 5V
Charging Cable
Type: 16340
Output: DC 4.2V
FY WG Mini 2 Axis Wearable Gimbal is compatible with GoPro HERO4 / 3+ / 3 and
cameras with similar dimensions. Reserved mounting space for GoPro LCD Touch
BacPac
STEP 1
Remove the screws on the
battery compartment,
insert two16340 batteries
and tighten the screws.
!
WARNING ! WARNING !
Do not power on the Do not power on the
gimbal before completing gimbal before completing
all the installation steps. all the installation steps.
STEP 2
Mount the camera carefully
to the mounting bracket
and tighten the screws.
Forward
Function Button Quick Reference
Function Operation
Long Press
Tilting Mode
For 2 Second
Long Press
Lock Mode
For 3 Second
Hexagonal
Socket Head
M 1.5 Allen Key
Cap Screw
M2*6mm
Video Output
and Camera
USB Connector USB Cable
Accessories for
1/4 inch screws 3
Hexagonal socket
head cap screw
2
T-clamp
STEP 3
Please choose one installing way:
1 Remove the L-clamp, use the 3M Adhesive to fix the bottom of the
Gimbal.
2
Use with GoPro Accessories, mount the provided T-clamp
to the side or the bottom of the gimbal. Attach T-clamp to any
3 accessories supporting the standard GoPro three-prong mount.
The gimbal can also be mounted directly to other accessories
using the standard 1/4" tripod mount. Tighten all screws and
ensure it is mounted firmly before using the gimbal.
Vertical
POWERING ON / OFF
Power on: Ensure the camera
is mounted securely, then hold
down the function button for 2
seconds to turn on the gimbal.
Power off: Hold down the
function button for 3 seconds
to turn off the gimbal.
Do not power on the gimbal before
completing all the installation steps
Tilting
LED Status Sound
Turn On And Switch To
Two Beeps
The Mode's LED Status
Turn Off After
Three Beeps
A moment
T-Clamp Long screw
Curved Adhesive Quick-Release
Mounts Buckle
Function
Button
（ ON / OFF ）
1
3M
adhesive
Screws For
The Battery
WARNING !
Compartment
Panning
Function
Power On
Shutdown
How to Charging
Extension Knurled
Thumb Screw
3M Adhesive
Manual Version 1.0
Tilting Axis
Function
Interface
Panning
Axis
Video And Camera
Charging Interface
1/4 Inch Screw Hole
T-Clamp Screw Hole
T-Clamp
Screw Hole
T-Clamp
Screw Hole
1/4 Inch
Screw Hole
USB Cable
5V USB Power
Adapter
（Not Included）