Using The Menu Key - Denso BHT-1400QWB-CE Software User Manual

3.7. Using the MENU key

Page 1
Page 2
The MENU key is used to set up the BHT basic configuration listed
below.
Step 1 Press the MENU key.
Step 2 Select the menu by moving the cursor vertically with the ▲ (up)
or ▼ (down) keys.
The selected menu is highlighted.
Step 3 Set the menu by moving the cursor horizontally by using the ◄
(left) or ► (right) keys.
To exit this menu, press any one of the three keys, the MENU key, the
ESC key or the ENT key.
Menu
Adjusts the notification beeper volume
for code scanning completion.
The volume is adjustable in 6 levels.
0: Mute, 1(Low) to 5 (High)
BEEPER
VOLUME
Note: Use the "Volume & Sounds" in the
control panel to adjust the audio sound
volume and change other sound
settings.
Enables or disables the vibrator to notify
VIBRATOR
code scanning completion.
BRIGHTNESS Adjusts the LCD brightness in 4 levels.
BRIGHTNESS
Changes the LCD brightness for the
power save mode in 2 levels.
(PS)
BACKLIGHT
TIME Set the time for the LCD backlight to dim
when the BHT is powered by the battery
*Referred to
and is not in use.
as "POWER
SAVE" in version Use the slider to set the time.
1.03 or earlier.
Performs a reset or full reset.
Note: Use the "Reset" menu in the
RESET/FULL
System Properties to disable the reset
RESET
and full reset functions.
(BhtShell>3:System Properties>Reset)
TOUCH PANEL Enable or disable the touch panel.
Set the timer for the BHT powered by the
battery to turn off automatically.
AUTO
POWER-OFF
If "0" is set, the auto power off function is
TIME
disabled. Check the battery level
regularly if set to "0".
- 16 -
Description Value
Level 0 to 5
ON or OFF
Level 0 to 3
Level 0 or 1
Set the time in
seconds
(max.600
seconds).
The backlight
stays on, if set
to "Always On".
None
ON or OFF
Set the time in
seconds.
(max.600
seconds)