Table of Contents
Advertisement
Power supply gesis EIB RM-PS
Output
(connection to basic module)
Rated voltage
Rated current
Number of modules that can be
connected (max.)
Electrical safety
Protection class
Degree of protection
Degree of soiling
Surge voltage category
Rated insulation voltage
Electrical isolation
Environmental conditions
Field of application
Ambient operating temperature
Storage temperature
Relative humidity
Moisture condensation
EMC requirements
Climate resistance
Housing material
Behaviour in fire (housing)
Weight
Dimensions
CE marking
9.6
9.6.1
1. Latch the module onto the DIN rail.
2. Connect the extension modules to the basic module using the flat cables supplied.
Ensure that, for each pair of extension modules, there is one on the right-hand and one
on the left-hand side of the basic module. Please make a note of which module
addresses are assigned to which slots on the basic module (by providing a label with
"Module no.:"; see diagram under C.). Place the power supply on the outside of the
extension modules, either to the left or right.
3. Establish the connections to both the power supply and EIB using the appropriate
terminal strips.
9.6.2
1. Disconnect the power supply from the module.
2. Remove the flat cable from the front of the device.
3. Undo the connections at the terminal strips.
4. Insert a screwdriver into the locking slide and release the module from the DIN rail.
42
Installation
Assembly (83.020.0401.0)
Disassembly (83.020.0401.0)
12,5 V DC SELV
160 mA
one basic module plus four extension modules; any
peak loads occurring with central commands are buff-
ered.
none (depends on subsequent work)
IP00, min. IP20 following installation of module in ge-
sis® RAN distribution box
2
III
250 V external conductor to N or PE
Air gap/creepage paths > 5.5 mm (supply/output)
for fixed installation (installation in gesis RAN distribu-
tion boxes) in interior and dry areas
-5 to +45 °C
-25 to +70 °C
5...93%
none
conforms with EN 61000-6-2, EN 61000-6-3 and EN
50090-2-2
according to EN 50090-2-2
Plastic, halogen and phosphorous-free; colour: black
conforms with UL 94 V-2
approx. 240 g
see "Dimensions, Connections and Function Elements"
in accordance with EMC Directive (residential and func-
tional buildings), Low Voltage Directive
Wieland Electric | BA000580 | 6/2009 (Rev. A)
Advertisement
Table of Contents
