Table of Contents
Advertisement
Parameterisation
7.5.1
Switch / Button
basic data
After you have selected the Switch / Button transmission element, you can roughly spec-
ify the functionality in the sending content area in the first step. The Switch / Button
value, Presence Information, Scene Number values are available. This preselection lim-
its the other parameterisation options as far as is necessary and determines which other
settings windows will be displayed.
7.5.1.1
Due to the very different applications of this transmit type, the possible settings are very
extensive. The plug-in supports you during the parameterisation using function template
which correspond to those for L
sensor (switch or button, single-face or double-face) and the use are parameterised here.
The following predefined values are available:
• Button, single-face (switching)
• Button, double-face (switching)
• Button, double-face (dimming)
• Button, single-face (dimming)
• Button, double-face (shutter), with end angle*
• Button, double-face (shutter), without end angle
• Button, single-face (edge control)
• Set value
*the corresponding functionality must be supported by the shutter actuator used (e.g.
Wieland
The plug-in performs all other settings automatically and adapts the corresponding pa-
rameters to the underlying L
26
Button / Switch transmission element
You determine the sending behaviour of the network variables in the bottom area.
Switch / Button transmission element (Switch / Button value)
The functionality can be selected from a list in the Input Function area. The type of the
gesis
RM-0/2W SI, 83.020.0404.0 or Wieland
M
specified profiles.
ON
ARK
M
profiles.
ON
ARK
gesis
RM-0/2W DC, 83.020.0407.0)
Wieland Electric | BA000580 | 6/2009 (Rev. A)
Advertisement
Table of Contents
