Table of Contents
Advertisement
2.6.4
Installation
To install the plug-in, please launch the "setup.exe" file and follow the on-screen instruc-
tions.
2.6.5
Installation routine
The installation routine automatically performs all the steps required to install the plug-in,
register the Wieland parameter descriptions( UDRFs) and copy the device templates. The
following default directories within the LonWorks basic directory (usually C:\LonWorks\)
are used:
• The plug-in is installed in ..\PlugIns\Wieland Electric\WLD_GESISRC\
• The UDRFs are stored under ..\types\User\Wieland Electric\
• The device templates are stored under ..\import\Wieland Electric\
Following successful installation, a new program directory called "Plug-In for gesis LON R
Devices" is created in the Windows Start menu, which can also be used for direct access
to the manual (this document).
2.6.6
Registration in the Windows registry
The installation routine automatically enters the plug-in in the Windows registry. If the
entry is not made automatically, it must be done manually before the LNS commissioning
tool can be used. To do this, launch one instance of the plug-in directly via the Windows
Start menu and select the "Register" button. The plug-in can then be registered using the
procedure for individual LON projects, which is specific to each commissioning tool.
If the Wieland plug-in needs to be removed from the Windows registry, please launch
the plug-in directly once again via the Windows Start menu and select "Unregister".
Wieland Electric | BA000580 | 6/2009 (Rev. A)
The LON Bus System
11
Advertisement
Table of Contents
