Table Of Contents - AEI DK-9523 Programming & Installation Manual

Table of Contents

Connection Facilities2
The Terminal Block2
Duress Output2
Output 22
Application Hints For The Auxiliary Facilities3
The Wire Harness3
N.c. Tamper3
Keypad Active Output Or Alarm Output3
The Led Indicators4
The Pacifier Tones And The Led Indicating Signals4
Basic Wirings Of An Interl-Lock System Using Keypad And Inter-Lock Controller Power Supply4
Basic Wirings Of An Inter-Lock System Using Two Keypads5
The Dap Jumper (Direct Access To Programming)5
The Factory-Set Master Code - Important Note5
Programming Options - Summary Chart5
Configuration Of Output Modes - Installer Programming6
Personal Safety - Installer Programming6
Output Activation Announcer - Installer Programming6
Basic Wiring For Alarm Arm-Disarm And Stand Alone Door Lock6
Application Examples7
Basic Wirings Of A Stand Alone Door Lock With Inhibit Authorization Code And Indication7
Single User Mode Or Multi-User Mode Selection7
The Default Values Table7
Set The System To Single User Mode8
Set The System To Multi-Usermode8
Specifications8
Programming And Use Of The Keypad8
Delete User (Multi-User Mode)9
Single User Mode Operation - An Example9
Multi-User Mode Operation - An Example10