Setting The Bass Increase (X-Bass); Switching Off The Equalizer; Confi Guring The Preamplifi Er Output For The Subwoofer (Subout) - Blaupunkt Memphis MP66 Operating And Installation Instructions

in the installation instructions.
You can adjust this volume in-
crease from 0 (no increase) to 5
(maximum increase).
➔
Press the softkey
"Auto Sound").
The "Auto Sound" menu appears.
Note:
If no increase is set, the display
shows "AUTO SND OFF".
➔
On the rocker switch
or to raise the volume in-
crease.
➔
On the rocker switch
or to lower the volume in-
crease.
Setting the bass increase ( X-Bass)
X-bass is a bass increase at low
volume. This bass increase can be
set in increments from 0 (no in-
crease) to 6 (maximum increase)
for the following frequencies:
32 Hz, 40 Hz, 50 Hz, 63 Hz, or
80 Hz.
➔
Press the softkey
"X-Bass").
The individual frequencies are
displayed as bars and the bass
increase as bar segment.
➔
On the rocker switch
or to select the desired fre-
quency.
➔
On the rocker switch
or to set the desired bass
increase.
Changing basic settings in the settings menu
9
(next to
3
, press
3
, press
;
(next to
3
, press
3
, press

Switching off the equalizer

➔
Press the softkey
"Digital Equalizer" menu (next
to "Off").
Confi guring the preamplifi er out-
put for the subwoofer ( Subout)
If you want to use an additional
subwoofer, it can be adjusted to
the other loudspeakers.
You can adjust the level of the
Subout preamplifi er output in 13
increments from –6 dB (maxi mum
decrease) to +6 dB (maximum in-
crease) for one of the following
cut-off frequencies: 80 Hz, 120
Hz, or 160 Hz.
➔
Press the softkey
"Audio Settings" menu (next
to "Subout").
The "Subout" menu appears.
➔
On the rocker switch
or to select the desired cut-
off frequency.
➔
On the rocker switch
or to set the desired level
of the preamplifi er output.
:
in the
:
in the
3
, press
3
, press
45