Agatec RL110 User Manual page 22

The person responsible for the product must ensure that all users understand
these directions and adhere to them.
Products classified as laser class 1, class 2 and class 3R do not require
• laser safety officer involvement,
• protective clothes and eyewear,
• special warning signs in the laser working area if used and operated
as defined in this user manual due to the low eye hazard level.
Products classified as laser class 2 or class 3R may cause dazzle, flash
blindness and afterimages, particularly under low ambient light conditions.
Agatec RL110 is a Class 2 laser product in accordance with:
• IEC60825-1 : 2007 "Radiation safety of laser products"
Laser Class 2 products:
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion
responses including the blink reflex.
WARNING:
Looking directly into the beam with optical aids
(e.g. binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical aids.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser is aimed above or
below eye level. (particularly with fixed installations, in machines, etc.)
Description
Maximum radiant power
Pulse duration (effective)
Pulse repetition frequency
Wavelength
Beam divergence
NOHD (Nominal Ocular
Hazard Distance) at 0.25s
Scan angle
22
Value
2,0 mW
Continuous, 2,23 ms; 1,49 ms; 1,11 ms
0, 5, 7.5, 10 U/s
635 ± 5 nm
< 1.5 mrad
35 m / 115 ft
5 to 35 (± 10%)