Side Panels; Installation Instructions; Tools, Hardware, Materials; Grounding The Refrigerator - GE PSB42LGRBV Nstallation Instructions

SIDE PANELS

Side panels must be
used whenever the
sides of the refrigerator
will be exposed. The
1/4" side panels will slip
into the side case trim.
Order the side panels
from the cabinet
manufacturer.
*Depending on
installation height.
TOOLS REQUIRED
• Tinsnips to cut banding
• Stepladder
• Bucket
• Level
• Appliance dolly
• Tubing cutter
• Flathead screwdriver
• 1/2" open-end wrench
• #2 Phillips screwdriver
• Drill and appropriate bits
• 7/32", 1/2" socket
• Safety glasses
• 7/16" open-end wrench
• Pliers
HARDWARE SUPPLIED
• Water filter bypass plug
• Anti-Tip brackets
• 1/4" nut and ferrule
• Dispenser trims for 1/4" and 3/4" custom panels
MATERIALS REQUIRED
• 36" long, 2" x 4" wood block for Anti-Tip bracket
installation
• Special 3M Dual Lock adhesive strips for 1/4" side
panels (if installing side panels)
• #12 or #14 wood screws for Anti-Tip bracket
• 1/4" O.D. copper water line tubing or GE
SmartConnect™ refrigerator tubing kits
• Water shutoff valve
• Custom panels for doors and grille panel
• Screws to secure refrigerator to cabinets

Installation Instructions

24"
*84"
*3" to 4"
2-9/16"
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is at
the same height as the rest of the flooring. This
surface should be strong enough to support a fully
loaded refrigerator, or approximately 700 lbs.
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under the
refrigerator where you are working.

GROUNDING THE REFRIGERATOR

IMPORTANT - (Please read carefully)
FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
The power supply cord of this appliance is equipped
with a three-prong (grounding) plug which mates with
a standard three-prong (grounding) wall receptacle to
minimize the possibility of electric shock hazard from
this appliance.
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Where a standard 2-prong wall outlet is encountered,
it is your personal responsibility and obligation to
have it replaced with a properly grounded 3-prong
wall outlet.
DO NOT, UNDER ANY
CIRCUMSTANCES, CUT
OR REMOVE THE THIRD
(GROUND) PRONG
FROM THE POWER CORD.
DO NOT USE AN ADAPTER PLUG TO CONNECT THE
REFRIGERATOR TO A 2-PRONG OUTLET.
DO NOT USE AN EXTENSION CORD WITH THIS
APPLIANCE.
11