Cobalt Digital Inc RaQ 4 User Manual page 93

To restore a backup file:
1. On the Maintenance screen, click Restore at the top. The File Restore table
appears. See Figure 31.
2. The RaQ 4 saves backed-up data in .raq files. Enter the path and filename of
the backup file, or click Browse to select the .raq file archived on your
computer which you wish to restore to the server.
Restore times can vary widely. Be careful not to interrupt an archive restore
as data could be corrupted.
✍
Note: If the file does not appear in the list and you are using
Netscape 4.x or Internet Explorer 4.x, you may need to change
"File Type" in the desktop to "All Files."
3. If you want to restore only some of the files, click Selective Restore and
select those files.
4. Click Restore A Backup File below the File Restore table.
✍
Note: Restoring large backup archives can cause your Web browser
to time out. If you upload the .raq archive through an FTP-based
application to the home directory of RaQ 4 Administrator, you can
select the archive from a menu on the Restore screen.
Do not interrupt an archive restore because this can corrupt data. If the restore
process is interrupted, the user can try to restore again.
To restore a user home directory or a virtual site directory, make sure the user or
virtual site already exists before restoring the files.
When data is restored, the RaQ 4 and its corresponding parts (virtual site, user,
email) are returned to the exact state they were in prior to backup.
Cobalt RaQ 4 User Manual
Maintenance
79