Table of Contents
Advertisement
Important Safeguards
3. Power Cord
Caution: The power-supply cord is used as the main disconnect
device. Ensure that the socket outlet is located or installed near the
!
equipment and is easily accessible.
Attention : Le cordon d'alimentation sert d'interrupteur général. La
prise de courant doit être située ou installée à proximité du matériel
!
et offrir un accès facile.
Achtung: Zur sicheren Trennung des Gerätes vom Netz ist der
Netzstecker zu ziehen. Vergewissern Sie sich, dass die Steckdose
!
leicht zugänglich ist.
4. Electrical Shock
To reduce the risk of electrical shock, do not disassemble this product. Take the
RaQ 4 to a qualified service person when service or repair work is required.
Opening or removing covers may expose you to dangerous voltage or other risks.
Incorrect reassembly can cause electric shock when this product is subsequently
used.
5. Operating the unit in an equipment rack
If you plan to install the Cobalt RaQ 4 in an equipment rack, take the following
precautions:
a.
Ensure the ambient temperature around the Cobalt RaQ 4 (which may
be higher than the room temperature) is within the limits specified in
Appendix B. See "Physical data" on page 159.
b.
Ensure there is sufficient air flow around the unit.
c.
Ensure electrical circuits are not overloaded; consider the nameplate
ratings of all the connected equipment and ensure you have overcurrent
protection.
d.
Ensure the equipment is properly grounded, particularly any equipment
connected to a power strip.
e.
Do not place any objects on top of the Cobalt RaQ 4.
iv
Cobalt RaQ 4 User Manual
Advertisement
Table of Contents
