Cobalt Digital Inc RaQ 4 User Manual page 68

Chapter 3: RaQ 4 Server Management
For the RaQ 4 to receive email, you or your network administrator must enter a
mail server host name in your organization's DNS server to designate the RaQ 4
as the mail server for a domain. Email service depends on DNS. so the IP address
of a DNS server must be entered in the network settings for the RaQ 4; if not, the
SMTP protocol will not work. If you did not enter this IP address in the Setup
Wizard, see "Network" on page 64.
For more information on DNS, see Appendix D, "Domain Name System".
Figure 20 shows the Email Parameters table.
Figure 20. Email Parameters table
Configuring the email parameters
To configure the email parameters:
1. In the Service Settings table, click the Parameters link next to Email Server.
The Email Parameters table appears.
2. Fill in the fields in the Email Parameters table. The following paragraphs
explain these fields.
3. Click Save Changes in the Email Parameters table.
4. Click Save Changes in the Service Settings table
54 Cobalt RaQ 4 User Manual