Preparation Before Operation; Laws And Regulations Regarding Noise Levels - Alpha Professional Tools VSP-110 Instruction Manual

PREPARATION BEFORE OPERATION

1. GFCI Information.
– Since the Alpha
provided as a standard accessory. For your safety and to prevent possible electric
shocks, it is strongly advised to test the GFCI on a regular basis.
Note: The GFCI must be used for your safety when this polisher is
used anywhere in a damp environment, when used with water, or
when it is used on
Never attach a damaged extension cord to the polisher.
Note: Use the appropriate extension cord as referred below. The
table shown below is for 115V use. For 220V use, the maximum
length of a cord may be twice as long as the cord for 115V.
Gauge/AWG
1.25mm
2mm
3.5mm
LAWS AND REGULATIONS OF NOISE LEVELS
Please observe local laws and regulations regarding noise level in order to avoid disturbing
surrounding areas. Install a soundproof wall if required to comply with the local laws and
regulations.
8
Wet Polisher is designed with double insulation, an in-line GFCI is
®
metal plates, steel frames or platens.
2
2
2
DANGER!
Maximum Length
30 Ft / 10m
45 Ft / 15m
90 Ft / 30m