Advertisement
AIR-300
Introducing the Alpha® AIR-300, designed for unique applications that are difficult to
accomplish using conventional polishers. A smaller version of the well-known
Alpha® AIR-658, the AIR-300 is ergonomically designed to fit comfortably in your
hand and only weighs 1.6 pounds reducing fatigue from long hours of polishing. The
smaller design is easy to maneuver and produces flawless sink rims and bowls. The
Alpha® AIR-300 accepts 3" and 4" discs along with 2", 3" and 4" rubber pads. It
requires a 3HP compressor with air consumption of 10 CFM and air pressure
between 85–95 PSI. The Alpha® AIR-300 Polisher easily converts from in-shop to
on-site; a must have for all fabricators!
Part No.
Description
AIR-300
Mini Air Polisher
AIR-008
Lubrication Oil for Pneumatic Tools (8oz.)
How to Use
Preparation:
Install and test air compressor and airline in the shop or jobsite. AIR-300 requires 10 CFM at 87 PSI for one unit.
Operation the tool at a pressure that exceeds the recommended operating specifications (85-90 PSI) may result in
premature failure of the tool.
Select appropriate couplings and connect the lead hose from the polisher to the airline from the compressor.
Install and test waterline in your shop or jobsite.
Bring a garden hose to the polishing area and connect to the hose bib fitting on the end of the black water hose.
Attach water hose and air supply hose to polisher.
Slide the blue exhaust hose to the end case of polisher then install the stainless hose band to secure.
Test all machine functions before use.
Usage:
Select the desired accessories for the application to be performed.
Attach the accessory onto the 5/8"-11 spindle of the polisher.
Open water control valve to desired volume.
Open air supply valve gradually to maximum level to perform application.
Close air supply valve to stop polisher.
Document # 7340 - Rev.-November 2010
Technical Notes
www.alpha-tools.com
Sections:
- How to Use
- Frequently Asked
Questions (FAQs)
Page 1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Alpha Professional Tools AIR-300
Summary of Contents for Alpha Professional Tools AIR-300
- Page 1 Preparation: Install and test air compressor and airline in the shop or jobsite. AIR-300 requires 10 CFM at 87 PSI for one unit. Operation the tool at a pressure that exceeds the recommended operating specifications (85-90 PSI) may result in premature failure of the tool.
- Page 2 What size air nipples are recommended for use on the AIR-300? The thread on the endcase for the air on the AIR-300 is metric or 1/4” BSPP; this is a parallel pipe thread that seals on the flat seat of the fitting.
- Page 3 We recommend inserting 2 -3 drops of Pneumatic Oil in the air line and running the AIR-300 for about 1minute on a daily basis at the end of your work shift.
- Page 4 ● Avoid dragging the air polisher on top of surface of stone. Aluminum body may leave aluminum mark on the surface. ● Use only Alpha® lubrication oil for pneumatic tools, part number AIR-008. Reference www.alpha-tools.com Document # 7340 - Rev.-November 2010 Page 4 of 4...
Need help?
Do you have a question about the AIR-300 and is the answer not in the manual?
Questions and answers