Before Use; Switching On And Off - Alpha Professional Tools VSP-110 Instruction Manual

BEFORE USE:

Before using the polisher, check the following items before plugging the power supply cord
into the power outlet.
1. Check the working voltage.
Be sure that the voltage specified on the name plate is the voltage available at the
power outlet. Do not use polisher with voltage higher than specified on the name
plate.
2. Make sure the ON/OFF switch is in the OFF position.

SWITCHING ON AND OFF

Switching on:
Push power switch to the forward position until
it locks into position as shown in Figure 1.
Switching off:
Push down on power switch to release to the
rear position as shown in Figure 2.
DANGER!
ON POSITION
OFF POSITION
Figure-1
Figure-2
11