ATH-Heinl W22 User Manual
  1. Manuals
  2. Brands
  3. ATH-Heinl Manuals
  4. Wheel Balancers
  5. W22
  6. User manual

ATH-Heinl W22 User Manual

Hide thumbs Also See for W22:
Table of Contents

Advertisement

Quick Links

Download this manual
USER´S MANUAL
ATH W22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W22 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ATH-Heinl W22

Summary of Contents for ATH-Heinl W22

  • Page 1 USER´S MANUAL ATH W22...

  • Page 2: Table Of Contents

    Distance arm ..........................- 51 - Laser............................- 53 - Computer board ........................- 54 - NOTES ............................- 55 - ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 2 -...

  • Page 3: Introduction

    Note all information’s regarding the tire changer into the following gaps. It is forbidden to remove the name plate from the tire changer. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 3 -...

  • Page 4: General Description

    4. Protective bow 5. Measuring device 6. Balancing shaft 7. Display 8. Operation panel 9. Brake pedal ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 4 -...
  • Page 5 7) Display unbalance STATIC 8) Indicator lamp for measuring unit g or oz 9) Indicator for weight position ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 5 -...
  • Page 6 Switchover for input parameters Do only use your fingers for operating the machine. In no case use sharp objects. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 6 -...

  • Page 7: Technical Data

    1330 x 800 x 1700 mm (L x W x H) Net / Gross weight 75 / 127 kg ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 7 -...

  • Page 8: Packing

    - Air humidity: 20%-95% Dimension 1.160 mm 980 mm 790 mm The attached picture shows the content of package. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 8 -...
  • Page 9 If anything is missing in the delivery (see packing list), contact our sales department. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 9 -...

  • Page 10: Scope Of Delivery

    Scope of delivery Wheel guard Consists of two plastic bows and a frame with handle LED Monitor with support ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 10 -...
  • Page 11 Hex keys Cup for quick nut Rubber lip for cup of quick nut Tension spring Anchor bolts ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 11 -...
  • Page 12 Cone 88 – 110 mm Cone 105 – 130 mm Adaptor-Ring for big cone 105 – 130 mm ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 12 -...

  • Page 13: Installation

    The installation of the machine is not allowed in wet rooms as well as in rooms with a risk of explosion. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 13 -...

  • Page 14: Mounting

    The wheel balancer must be fixed firmly on the floor for achieving an exact balancing result. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 14 -...
  • Page 15 Now fix the balancing shaft to the clamping cup with the attached screw. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 15 -...
  • Page 16 Remove the handle bar on the frame of wheel cover. Remove the screw for fixing the frame on the wheel cover mechanism. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 16 -...
  • Page 17 Fix the complete wheel cover with the screw on the main shaft of the wheel cover mechanism. Add again the handle bar on the frame. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 17 -...
  • Page 18 Connect the machine with an own connection and an own suitable circuit breaker. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 18 -...

  • Page 19: Setting And Calibration

    Display of unbalance g / oz Automatic start when closing the protective bow On / Out Calibration program HID program ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 19 -...

  • Page 20: Calibration Of Piezo Transducer

    Position the calibration weight (100g) on the OUTER side of the rim. Press again the button START or close the protection bow for finishing the calibration. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 20 -...

  • Page 21: Operation

    MAINTENANCE, DISPOSAL Reparations are only allowed to be made by the after sales service of the manufacturer. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 21 -...

  • Page 22: Safety Instructions

    Do not put big objects on the machine as this could affect the accuracy of the balancing result. Further safety instructions in detail are indicated in the single chapters. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 22 -...

  • Page 23: Utilization

    With a clamping hood, the rim can be clamped on the balancing shaft. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 23 -...
  • Page 24 At ALU 1 there must be observed the following measurements while positioning the adhesive weights: ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 24 -...
  • Page 25 4. Input of wheel parameters a) Basically: In the motorcycle mode has to be used an optional test prod (+100 mm). ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 25 -...
  • Page 26 [D] Rim diameter [dE] Rim diameter on the point for the weight Input with the corresponding buttons. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 26 -...
  • Page 27 Turn now the wheel until all diodes for the outer position illuminates. Confirm now this position with ALU. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 27 -...
  • Page 28 Now place the weight on the measuring gauge and put it by means of it on the rim. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 28 -...
  • Page 29 Following the wheel can be clamped again on the wheel balancer, in doing so pay attention to the marking on the clamping cup. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 29 -...
  • Page 30 Starting of the balancing process by pressing the button START or closing the protection bow. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 30 -...

  • Page 31: Maintenance

    Err -7- Saved data´s were delete Missed 100g weight Err -8- Damaged sensor Damaged power or main board ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 31 -...

  • Page 32: Troubleshooting

    In such a case, a readjustment is recommendable without taking off the wheel. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 32 -...

  • Page 33: Maintenance And Service Instructions

    3. Exchange the new fuse with the old one, thus only use fuses with the same values. If the error exists further, please contact the ATH-Service. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 33 -...

  • Page 34: Declaration Of Conformity

    BY ALTERATIONS AND / OR CHANGES IN THE MACHINE IS THE CE TEST OUT FORCE AND LIABILITY EXCLUDED. ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 34 -...

  • Page 35: Warranty Note

    Latent defect (Shipping damage is discovered upon unpacking the goods, send damage report with pictures within 24 hours to ATH-Heinl) Place & date Signature & stamp ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 35 -...
  • Page 36 (overload, outdoor installation, technical changes) are excluded from warranty! ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 36 -...

  • Page 37: Spare Part Book

    SPARE PART BOOK ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 37 -...

  • Page 38: Machine

    Machine ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 38 -...
  • Page 39 External Gauge RTP0172 021101012 Press Key Board RSF1100 021101020 Press Key Panel RAB0015 020602075 ATH Front plastic cover ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 39 -...

  • Page 40: Display

    030501005 Washer; Flat 8mm GB/T 96.1-2002 030502005 Washer; Spring 8mm GB/T 93-2002 030201063 SHCS M8x20 GB/T 70.1-2000 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 40 -...

  • Page 41: Accessory

    0530210003 External Gauge Calibration Kit OPTIONAL HIS2535 030201064 SHCS M8x25 GB/T 70.1-2000 12 RIS0062 022102035 Allen Wrench ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 41 -...

  • Page 42: Hood Mounting

    030201002 SHCS M4x8 GB/T 70.1-2000 030501105 Washer; Wide brim 8mm GB/T 96.2-2002 030201067 SHCS M8x40 GB/T 70.1-2000 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 42 -...

  • Page 43: Hood

    10mm GB/T 93-1987 030301003 M10 GB/T 41-2000 RSB0004 020601196 Wheel Hood Handle 030201063 SHCS M8x20 GB/T 70.1-2000 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 43 -...

  • Page 44: Motor

    030502004 Washer; Spring 6mm GB/T 93-1987 030501004 Washer; Flat 6mm GB/T 95-2002 RRR0133 020403001 Motor Belt 4PJ965 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 44 -...

  • Page 45: Main Shaft

    25mm GB 894.2-86 RWW0214 0530207006 Main Shaft RGW0062 0530207054 Threaded Shaft/Spindle RGW0063 030201172 SHCS M14x260 GB/T 70.1-2000 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 45 -...

  • Page 46: Sensor

    Sensor Vertical Shaft 021301008 RPA0129 021006033 Piezo Sensor; Vertical RPA0130 020402015 Sensor Wire 030502006 Washer; Spring 10mm GB/T 93-1987 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 46 -...

  • Page 47: Encoder

    030501001 Washer; Flat 3mm GB/T 95-2002 RRP0139 0530207003 Encoder Board Support 030201265 Cross recessed M3x10 GB/T 818-2000 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 47 -...

  • Page 48: Brake

    Brake ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 48 -...
  • Page 49 M6x20 GB/T 70.1-2000 030501004 Washer; Flat 6mm GB/T 95-2002 030301105 M6 GB/T 6170-2000 RBA0011 0530106033 Brake Rod Connector Linkage ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 49 -...

  • Page 50: Power Board

    0530206056 Air-Cooling Fin 030301101 M3 GB/T 6170-2000 12 RSP0169 021003003 Power Board 13 RTR0174 020404006 Transformer 220V～Double 9V 25W ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 50 -...

  • Page 51: Distance Arm

    Distance arm ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 51 -...
  • Page 52 34 RGM0001 020601104 Distance Arm Head Connect Rod 35 RBS2001 030204100 Cross recessed tapping screw ST4.9x32 GB/T845-1985 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 52 -...

  • Page 53: Laser

    M4x12 GB/T 818-2000 030202301 Hexagon tapper head set screw M5x5 GB/T 78-2000 RRB7000 020402010 Weight Indicator Light ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 53 -...

  • Page 54: Computer Board

    GB/T 819.1-2000 M3x25 030502001 Spring washer GB/T 93-1987 3 030301101 GB/T 6170-2000 M3 RSP0168 021003016 Computer board ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 54 -...

  • Page 55: Notes

    NOTES ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 55 -...
  • Page 56 ® Copyright ATH-Heinl GmbH & Co. KG, 2017, All rights reserved. / Misprint and technical changes reserved / Issue: 07/2017 - 56 -...

Table of Contents