Table of Contents
Advertisement
COM Timeout can be set 300 seconds or less by checking the box.
Uncheck the box :
10-60000msec possible to set every millisecond
Check the box :
61-300sec
possible to set every second
Set Source Port No. of serial communication devices at server mode.
Default setting is 9094 for RS232C and 9095 for RS485.
This is the display when TCP mode is selected.
This is the display when Modbus TCP mode is selected for COM1 (RS232C).
It shows that the source port number of serial communication device to server.
"502", the standard of Modbus TCP (RTU), is recommended.
17
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Advertisement
Table of Contents
