General Configuration Parameters; Table 4 - General Configuration Parameters - Honeywell SmartLine STT700 HART User Manual

4.3.3 General Configuration Parameters

Select the General Button on the DEVICE MAIN MENU page, and configure parameters.
See Table 4.
Read (R) or
Parameter
Read/Write (R/W)
PV Type
Communication
Mode
FS Direction
(HART only)
Line Filter
(HART only)
T/C Fault
Detect
Select the Back button to go back to the DE MAIN MENU.
Page 22
Table 4 – General Configuration Parameters
Configuration Details
Dual Range Smart Transmitter Digital Communications
R/W (STDC) or Single Range or Single Range with
secondary variable (SV).
R/W Analog, DE 4-byte, or DE 6-byte
Failsafe (FS) direction: upscale or downscale, switch
non-selectable on the electronics module. See the
R
STT700 SmartLine Temperature Transmitter User
Manual for details.
Non-selectable: 50hz or 60hz.
R
R/W Select: Enabled or Disabled.
STT700 Series HART/DE Option User's Manual
Revision 1