Device Configuration And Parameter Descriptions; Table 9 - Hart Transmitter Parameters; Table 10 - Basic Configuration - Honeywell SmartLine STT700 HART User Manual

5.2.9 Device Configuration and Parameter Descriptions

Table 9 lists descriptions of all parameters for a HART Transmitter with the Online tab menu path.
The same parameters may be accessed from the My Device tab.
Device Setup
Basic Configuration
Advanced Configuration
Monitor
Review
Online Menu Flow
Online
Online Menu Flow
Basic Configuration /General
Device Setup / Basic
Configuration / General
Basic Configuration / Process Variables
Page 40
Table 9 – HART Transmitter Parameters
Menus include:
General, Process Variables (PV), 4-20mA Outputs, Summary
Sensors, Calibration, CVD, CVD1, CVD2, Alarm, Services,
Summary
Dashboard, Device Status, Device Information, Diagnostics,
MSG Details
Displays all parameters
Parameter menu/
name
Honeywell Logo
Table 10 – Basic Configuration
Parameter menu/
name
Transmitter Install
Date
Tag
Long Tag
Date
Descriptor
Message
Clear Message
Final Asmbly num
STT700 Series HART/DE Option User's Manual
Description/Valid values
Photograph of a STT700 temperature
transmitter along with the official "Honeywell"
logo
Description/Valid values
Enter the date of site installation. This is a
one-time only configuration.
Enter tag identification up to eight
alphanumeric characters.
Enter a long tag name up to 32 alphanumeric
characters.
Enter a date for user information only.
Enter a descriptor for user information only
(up to 16 alphanumeric characters)
Enter a message up to 32 alphanumeric
characters) that will be sent to the
Display. The message will be shown on the
Display interspersed with the configured
screens. To stop displaying the message,
select "Clear Display" in the Device
Information menu.
Selecting this option clears the "Message"
and it will no longer be sent to the Display.
Enter the final assembly number of the
STT700 temperature transmitter
Revision 1