Federal Communication Commission (Fcc); Fcc Compliance Statement; Industry Canada (Ic); Ic Compliance Statements - Honeywell OneWireless XYR 6000 Professional Installation Manual

2. Federal Communication Commission (FCC)

2.1 FCC Compliance Statement

•
This device complies with Part 15 of FCC Rules and Regulations. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radiofrequency energy and, if not installed and used in accordance with these instructions, may
cause harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
•
Intentional or unintentional changes or modifications must not be made to the XYR 6000 unless under
the express consent of the party responsible for compliance. Any such modifications could void the
user's authority to operate the equipment and will void the manufacturer's warranty.

2.2 Industry Canada (IC)

2.2.1 IC Compliance Statements

•
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropic radiated power (EIRP) is not more than that permitted for successful
communication.
•
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.
•
This Class A digital apparatus complies with Canadian ICES-003.
•
French: Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

2.2.2 RF Safety Statement

•
To comply with FCC's and Industry Canada's RF exposure requirements, the following antenna
installation and device operating configurations must be satisfied.
•
Remote Point-to-Multi-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent
structures with a separation distance between the antenna(s) of greater than 20cm and a separation
distance of at least 20cm from all persons.
•
Furthermore, when using integral antenna(s) the XYR 6000 unit must not be co-located with any other
antenna or transmitter device and have a separation distance of at least 20cm from all persons.
Revision 3 OneWireless OneWireless XYR 6000 Transmitter Professional Installation Guide
September 2012
2. Federal Communication Commission (FCC)
2.1. FCC Compliance Statement
5