Installation; Features And Options; Table 1: Installation Considerations; Figure 1 - Stt700 Temperature Transmitter (Hart Left, De Right) - Honeywell SmartLine STT700 HART Quick Start Installation Manual

INSTALLATION

Evaluate the site selected for the Transmitter installation with respect to the process
system design specifications and Honeywell's published performance characteristics
for your particular model. Conditions to be considered include:
Environmental Conditions:
 Ambient temperature
 Relative Humidity
Potential Noise Sources:
 Radio Frequency Interference (RFI)
 Electromagnetic Interference (EMI)
In preparation for post-installation processes, refer to the MC Toolkit User Manual,
Document # #34-ST-25-50 (MCT404), for battery conditioning and device operation
and maintenance information.

FEATURES AND OPTIONS

As shown in Figure
this module are connected to the process sensors, measure the process variables,
respond to setup commands and execute the software and protocol for the different
temperature measurement types.
Figure 1 – STT700 Temperature Transmitter (HART left, DE right)
The transmitter measures process temperature and outputs a signal proportional to
the measured process variable (PV). Available output communication protocols
include 4 to 20mA, Honeywell Digitally Enhanced (DE) and HART protocols.
July 2017

Table 1: Installation considerations

1, the STT700 is packaged in a single module. The elements in
STT700 Quick Start Installation Guide
Process Parameters
 Temperature
 Maximum Sensor Input Ratings
Vibration Sources
 Pumps
 Motorized System Devices
(e.g., pumps)
 Valve Cavitation
3