Battery Installation; To Open And Close Battery Compartment Cover; Low Battery Message; Function Table Reference - Arcam CR 9000 Operating Manual

Battery Installation

A: To Open and Close the Battery Compartment Cover
1 To open the battery cover, push the latch forward toward the top of the remote
control, and lift the latch up.
2 To close the battery cover, slide the battery cover straight back in (toward the top of
the remote) and push down until it "Clicks" into place.
B: Low Battery Message
When the Liquid Crystal Display (LCD) flashes L__BAT, the batteries should be replaced.
Note: Batteries should last about 6 months under normal conditions. The
CR9000 remote control will retain its programmed memory for up to one
year after the batteries are removed and up to ten years after the batteries
go "dead".
3
Using Your Remote
A: Function Table Reference
4