Operation; Device Buttons; Main Device Mode; Automatic Audio Mode - Arcam CR 9000 Operating Manual

Using Your Remote
D: Operation
After you have programmed the remote control for your equipment, use the
following procedures to operate your home entertainment system:
1 Press the Device Button that you wish to operate: e.g. to operate a TV, press
the TV Device Button; to operate a VCR, press the VCR Device Button, etc.
2 Aim the remote control at the device and press the POWER button to turn
on the device.
3 Press the buttons that send out the commands you desire.
Note: Some audio/video devices have separate buttons for POWER
ON and POWER OFF. To operate these devices on the remote, press
the corresponding device button to turn the equipment ON and press
the POWER button to turn the equipment OFF.
Please try all the functions of this remote control with your equipment. The most
common functions are labelled on the remote. However, some of the secondary
functions might be stored under a button that has a different name from the one on
your original remote control. Please refer to the Function Tables on pages (5 - 7)
for details.
19
Using Your Remote

Device Buttons

Pressing a Device button at the top of the remote performs the following functions:
1 Changes the Device mode on the CR9000 remote control.
2 Sends out a Power ON command for the Device, if applicable.
3 Sends out a preprogrammed or learned Audio receiver/preamplifier INPUT
SELECTION, if applicable.
4 Toggles between the Main Device mode and the Automatic Audio Mode.
Note: Device buttons can learn new information only in the Audio
mode. Please refer to page 16 for details.

Main Device Mode

When the main Device mode is displayed in the LCD, the CR9000 will operate in a
standard operating mode and all the buttons will operate the preprogrammed,
learned and punch through features for that Device mode.

Automatic Audio Mode

The CR9000 is designed to provide convenient and continuous operation of your
home theatre system's A/V receiver or preamplifier. You can have full and
immediate access to your receiver's audio volume and surround controls in seven
different device modes of the remote control by pressing the same Device button a
second time.
The Automatic Audio Mode enables you to watch a video program or listen to a
CD and also adjust audio volume and surround levels in the same Device mode.
The LCD will show A-XXX indicating that the remote control is in the Automatic
Audio mode.
20