Transport "Punch Through - Arcam CR 9000 Operating Manual

Advanced Features
Transport Control "Punch Through"
You can set-up your remote control so that VCR or CD Transport Controls (PLAY,
STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will also operate in
other modes on the remote control.
Example: Control VCR functions while operating the remote control
in the TV mode.
Note: When this feature is active, the VCR or CD functions (PLAY,
STOP, FAST FORWARD, REWIND, PAUSE, and RECORD) will
override any existing functions pre-assigned to these buttons in that
mode.
To Set-Up:
1 Select the mode into which you want to program Transport Control Punch
Through.
2 Press the corresponding Device Button and the MUTE button,
simultaneously. SET will appear in the LCD.
3 Press the SELECT/PLAY button. PUNCH will appear in the LCD.
4 Press either the VCR Device Button to set-up for VCR Transport Control or
the CD Device Button to set-up for CD Transport Control. VCR or CD will
flash in the LCD, depending on the Device Button selected.
25
Advanced Features
The VCR or CD Transport Controls (Play, Stop, Fast Forward, Rewind, Pause, and
Record) will now override the original functions of the buttons in this mode.
To Return to the Original Setting:
1 Select the mode that you want to turn off the Transport Control "Punch
Through."
2 Press the corresponding Device Button and the MUTE button,
simultaneously. SET will appear in the LCD.
3 Press the SELECT/PLAY button. PUNCH will appear in the LCD.
4 Press the Device Button again. The Device Mode will flash in the LCD.
The VCR or CD Transport Control "punch Through" feature is now turned off.
The original functions assigned to these buttons are restored.
26