Setting The Jumpers; How To Set Jumpers - IBASE Technology IB981AF-C226 User Manual

2.2

Setting the Jumpers

Set up and configure your IB981 by using jumpers for various settings
and features according to your needs and applications. Contact your
supplier if you have doubts about the best configuration for your use.
2.2.1

How to Set Jumpers

Jumpers are short-length conductors consisting of several metal pins
with a non-conductive base mounted on the circuit board. Jumper
caps are used to have the functions and features enabled or disabled.
If a jumper has 3 pins, you can connect either PIN1 to PIN2 or PIN2 to
PIN3 by shorting.
Pin# 1
A 3-pin jumper
Refer to the illustration below to set jumpers.
Pin closed
Open
1-2
2-3
When two pins of a jumper are encased in a jumper cap, this jumper
is closed, i.e. turned On.
When a jumper cap is removed from two jumper pins, this jumper is
open, i.e. turned Off.
12
3
2
Oblique view
A jumper cap
Schematic illustration in the manual
1 2 3
1 2 3
1 2 3
IB981 User's Manual