Setting The Jumpers - IBASE Technology IB112 User Manual

INSTALLATIONS

Setting the Jumpers

Jumpers are used on IB112 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IB112 and their respective functions.
Jumper Locations on IB112 ................................................................. 11
S1 (sw1, sw2): System Boot Configuration ......................................... 12
S2: System Boot Configuration (factory use only) ............................... 12
JP9: COM2 RS232, RS422, RS485 Selection ..................................... 14
JP7: USB +3.3V/+5V Power Setting ................................................... 14
J14: LVDS +3.3V/+5V Power Setting ................................................. 15
JP10: LED Brightness +5V/+9.6V/+12V Power Setting ..................... 15
10 IB112 User's Manual