2.5.6
Front Panel Setting Connector (J3)
Pin
Assignment
1
VCC
3
NC
5
Ground
7
NC
9
Ground
11
Ground
13
Ground
15
NC
17
Ground
19
HDD LED +
J3 is utilized for system indicators to provide light indication of the
computer activities and switches to change the computer status. It
provides interfaces for the following functions.
•
Speaker (Pins 2 ~ 8)
This connector connects to the system speaker on control
panel.
•
Power LED (Pins 1 ~ 5)
This connector connects to the system power LED on control
panel. This LED will light when the system turns on.
•
ATX Power ON Switch (Pins 13 and 14)
The 2 pins make an "ATX Power Supply On/Off Switch" for the
system that connects to the power switch on the case. When
pressed, the power switch will force the system to power on.
When pressed again, it will power off the system.
22
2
1
Pin
Assignment
2
Speaker Out
4
NC
6
Ground
8
VCC
10
NC
12
NC
14
PWR_SW
16
NC
18
RST
20
HDD LED -
IB981 User's Manual
20
19